Request Fall Service

Print, review, and return our Fall Service Work Order or, fill and submit the form below.

We will contact you via the e-mail or telephone number that you provide to discuss your service needs and estimated cost. 

 

Name *
Name
Phone Number *
Phone Number
Billing Address
Billing Address
Type of Boat *
Shrink Wrap (includes and materials)
Notes: (1) No tarps allowed. Only Marina staff may shrink wrap boats. (2) Saliboats wrapped with masts up and boats with bridges or towers over 8 feet will be charged an additional $50.
Number of Engines
Engine Type
Winterize Outboard Engine - 2-stroke
Price includes labor. Materials such as antifreeze, rust inhibitors, fogging oil, fuel stabilizer, lubricants, etc. charged separately.
Winterize Outboard Engine - 4-stroke
Price includes labor. Materials such as antifreeze, rust inhibitors, fogging oil, fuel stabilizer, lubricants, etc. charged separately.
Winterize Inboard or I/O
Price includes labor. Materials such as antifreeze, rust inhibitors, fogging oil, fuel stabilizer, lubricants, etc. charged separately.
Winterize Diesel Engine
Mechanic labor rate applies plus parts and materials such as antifreeze, rust inhibitors, fuel stabilizer, lubricants, etc. charged separately.
Domestic Systems
Mechanic labor rate applies. Service include: drain water lines and tanks, flush with non-toxic anti-freeze. Holding tanks MUST be emptied before boat is hauled to yard.
Other Mechanic Service
Unless otherwise noted, mechanic labor rate applies.
Other Boatyard Services
Section

Reminders 

Fall engine and other winterization services are essential to remove water and prevent freezing.  Freeze damage often isn't detected until you try and use your boat next season.  It is costly and time consuming to repair and can result in a substantial loss of next boating season.

Standard Outboard Winterization Services include:  run and warm engine, flush engine with fresh water, spray carburetor and cylinders with fogging oil, spray engine with rust inhibitors, drain and refill gear case with lubricant, add fuel stabilizer, grease moving parts, change fuel filter.

Standard Inboard and I/O Winterization includes:  run and warm engine, flush engine with fresh water, add non-toxic antifreeze with rust inhibitor, spray carburetor and cylinders with fogging oil, spray engine with rust inhibitors, add fuel stabilizer, change fuel filter, change oil & filter.

Standard Diesel Winterization includes: run and warm engine, flush with fresh water, add non-toxic antifreeze with rust inhibitors, change oil & oil filter; change fuel filter in spring.

Most of our fall/winterization services are available ala carte.  For any that involve extra hourly labor charges, the following rates apply.

Labor Rates

  • Mechanic: $110/hour
  • Skilled technician:  $85/hour
  • Boatyard labor: $60/hour

Invoices are due and payable at the time rendered.

We accept cash, check, Visa or MasterCard.